RAID 0 - Data striping without redundancy (no protection). Optimized for Performance. RAID 0 uses striping to write data across multiple drives simultaneously. This means that when you write a 5GB file across 5 drives, 1GB of data is written to each drive. Parallel reading of data from multiple drives can have a significant positive impact on performance.
The trade-off with RAID 0 is that if one of those drives fails, all of your data is lost and you must restore from backup image.
RAID 0 is an excellent choice for cache servers, where the actual data being stored is of little value, but performance is very important.
Minimum number of drives: 2
Strengths: Highest performance.
Weaknesses: No data protection; One drive fails, all data is lost.
Many computer users have the experience of system crash or data loss, for example, hardware conflict, bad ram, hard disk drives overload, viruses attack, software conflict, etc. If your system is crashed and then you will realize that you really need backup software after suffering the great pain to sacrifice your precious weekends or dating time to reinstall your operating system.
Due to the distinguishing feature of RAID 0 that if one of those drives fails, all of your data is lost, it is a huge risk, so you have to backup RAID 0 drive. To RAID users, there are two questions they may ask, "Does the software compatible with RAID?" "Is it easy, safe and fast to backup RAID 0 drive?" The answer is yes and this article will introduce a great solution to backup RAID 0 with a RAID backup freetware.
1. Launch EASEUS Todo Backup and choose "Backup" to run backup wizard.
2. Choose a partition or the entire virtual RAID disk.
3. Follow the other steps by several mouse clicks to complete the RAID backup.
You can save the image archive to local hard disk, LAN computer disk or CD/DVD. Besides backing up to an image archive, you may also clone the virtual disk to replace or upgrade the old one by this RAID backup freeware.
To restore the current system partition on RAID 0, you have to operate by bootable disk, but little product has RAID-compatible bootable disk, including the commercial products, but the free RAID backup software - EASEUS Todo Backup provides the feature to restore by WinPE bootable disk.
1. Put the WinPE bootable disk in to the CD-ROM, set CD-ROM as first boot device in BIOS and then boot from this disk.
2. Click "Restore" in central place or "Operation" -> "Restore" from menu bar
3. Select the backup archive you want to restore.
4. Select the partition of the image archive you want to recover. Click "Next".
5. Choose a target partition or unallocated space.
6. Select a partition type for the target partition.
7. After all these steps, you will successfully restore system partition. Take out the bootable CD from CD-ROM and reboot.
EASEUS Home | Solution | About Company | Contacts | Resource | Blog | Forum | Directory | Links | Sitemap
Copyright © 2005-2010 CHENGDU YIWO Tech Development Co., Ltd. ALL RIGHTS RESERVED.
Privacy Policy |
License |
Legal Counsel |
Valid XHTML 
| Valid CSS
